はじめに
FRRouting
frrouting.org
MetallbをBGPモードで動かしてみるため、OpenWrt で BGP を構成するためのパッケージを探したところ、FRRが使用できることがわかりましたので使ってみます。
インストール
パッケージの確認
root@OpenWrt:~# opkg list | grep frr frr - 8.5.1-1 - FRRouting is free software that implements and manages various IPv4 and IPv6 routing protocols. Currently FRRouting supports BGP4, BGP4+, OSPFv2, OSPFv3, RIPv1, RIPv2, RIPng, IS-IS, PIM-SM/MSDP, LDP, VRRP and Babel as well as very early support for EIGRP and NHRP. frr-babeld - 8.5.1-1 - babeld routing engine frr-bfdd - 8.5.1-1 - bfdd routing engine frr-bgpd - 8.5.1-1 - bgpd routing engine frr-eigrpd - 8.5.1-1 - eigrpd routing engine frr-fabricd - 8.5.1-1 - fabricd routing engine frr-isisd - 8.5.1-1 - isisd routing engine frr-ldpd - 8.5.1-1 - ldpd routing engine frr-libfrr - 8.5.1-1 - zebra library frr-nhrpd - 8.5.1-1 - nhrpd routing engine frr-ospf6d - 8.5.1-1 - ospf6d routing engine frr-ospfd - 8.5.1-1 - ospfd routing engine frr-pathd - 8.5.1-1 - pathd routing engine frr-pbrd - 8.5.1-1 - pbrd routing engine frr-pimd - 8.5.1-1 - pimd routing engine frr-pythontools - 8.5.1-1 - Python reload tool frr-ripd - 8.5.1-1 - ripd routing engine frr-ripngd - 8.5.1-1 - ripngd routing engine frr-staticd - 8.5.1-1 - staticd routing engine frr-vrrpd - 8.5.1-1 - vrrpd routing engine frr-vtysh - 8.5.1-1 - integrated shell for frr routing software frr-watchfrr - 8.5.1-1 - frr watchdog frr-zebra - 8.5.1-1 - Zebra daemon
frr と関連パッケージのインストール
これらの関連パッケージをまとめてインストールした方がよさそうです。
opkg install frr frr-bgpd frr-watchfrr frr-zebra frr-staticd frr-vtysh
root@OpenWrt:~# opkg install frr frr-bgpd frr-watchfrr frr-zebra frr-staticd frr-vtysh Installing frr (8.5.1-1) to root... Downloading https://downloads.openwrt.org/releases/23.05.3/packages/arm_cortex-a9/packages/frr_8.5.1-1_arm_cortex-a9.ipk Installing librt (1.2.4-4) to root... Downloading https://downloads.openwrt.org/releases/23.05.3/targets/bcm53xx/generic/packages/librt_1.2.4-4_arm_cortex-a9.ipk Installing frr-bgpd (8.5.1-1) to root... Downloading https://downloads.openwrt.org/releases/23.05.3/packages/arm_cortex-a9/packages/frr-bgpd_8.5.1-1_arm_cortex-a9.ipk Installing libcap (2.69-1) to root... Downloading https://downloads.openwrt.org/releases/23.05.3/packages/arm_cortex-a9/base/libcap_2.69-1_arm_cortex-a9.ipk Installing libyang (2.0.112-1) to root... Downloading https://downloads.openwrt.org/releases/23.05.3/packages/arm_cortex-a9/packages/libyang_2.0.112-1_arm_cortex-a9.ipk Installing frr-libfrr (8.5.1-1) to root... Downloading https://downloads.openwrt.org/releases/23.05.3/packages/arm_cortex-a9/packages/frr-libfrr_8.5.1-1_arm_cortex-a9.ipk Installing frr-watchfrr (8.5.1-1) to root... Downloading https://downloads.openwrt.org/releases/23.05.3/packages/arm_cortex-a9/packages/frr-watchfrr_8.5.1-1_arm_cortex-a9.ipk Installing frr-zebra (8.5.1-1) to root... Downloading https://downloads.openwrt.org/releases/23.05.3/packages/arm_cortex-a9/packages/frr-zebra_8.5.1-1_arm_cortex-a9.ipk Installing frr-staticd (8.5.1-1) to root... Downloading https://downloads.openwrt.org/releases/23.05.3/packages/arm_cortex-a9/packages/frr-staticd_8.5.1-1_arm_cortex-a9.ipk Installing frr-vtysh (8.5.1-1) to root... Downloading https://downloads.openwrt.org/releases/23.05.3/packages/arm_cortex-a9/packages/frr-vtysh_8.5.1-1_arm_cortex-a9.ipk Installing more (2.39-2) to root... Downloading https://downloads.openwrt.org/releases/23.05.3/packages/arm_cortex-a9/base/more_2.39-2_arm_cortex-a9.ipk Configuring more. Configuring libcap. Configuring librt. Configuring frr. Started watchfrr Configuring libyang. Configuring frr-libfrr. Configuring frr-vtysh. Configuring frr-bgpd. Configuring frr-staticd. Configuring frr-watchfrr. Configuring frr-zebra.
frrの設定
BGPを有効にします。
daemons の設定
root@OpenWrt:~# cat /etc/frr/daemons
# The staticd,watchfrr and zebra daemons are always started. # bgpd=no ospfd=no #ospfd_instances=1,20 ospf6d=no ripd=no ripngd=no isisd=no pimd=no ldpd=no nhrpd=no eigrpd=no babeld=no sharpd=no pathd=no pbrd=no bfdd=no fabricd=no vrrpd=no # # If this option is set the /etc/init.d/frr script automatically loads # the config via "vtysh -b" when the servers are started. # Check /etc/pam.d/frr if you intend to use "vtysh"! # vtysh_enable=yes zebra_options=" -A 127.0.0.1 -s 90000000" bgpd_options=" -A 127.0.0.1" ospfd_options=" -A 127.0.0.1" ospf6d_options=" -A ::1" ripd_options=" -A 127.0.0.1" ripngd_options=" -A ::1" isisd_options=" -A 127.0.0.1" pimd_options=" -A 127.0.0.1" ldpd_options=" -A 127.0.0.1" nhrpd_options=" -A 127.0.0.1" eigrpd_options=" -A 127.0.0.1" babeld_options=" -A 127.0.0.1" sharpd_options=" -A 127.0.0.1" pbrd_options=" -A 127.0.0.1" staticd_options="-A 127.0.0.1" bfdd_options=" -A 127.0.0.1" fabricd_options="-A 127.0.0.1" vrrpd_options=" -A 127.0.0.1" # The list of daemons to watch is automatically generated by the init script. #watchfrr_options="" # for debugging purposes, you can specify a "wrap" command to start instead # of starting the daemon directly, e.g. to use valgrind on ospfd: # ospfd_wrap="/usr/bin/valgrind" # or you can use "all_wrap" for all daemons, e.g. to use perf record: # all_wrap="/usr/bin/perf record --call-graph -" # the normal daemon command is added to this at the end.
既定の設定ではnoになってますので、bgpd=yes にします。
bgpd=yes
サービスを再起動します。
root@OpenWrt:~# service frr restart Stopped staticd Stopped zebra Stopped watchfrr Started watchfrr
おわりに
本題のMetallbと組み合わせて使用する方法については下記で説明しています。
